TM 9-2320-209-20-3-1 d. Replacement. FRAME 1 1. Put grommet (1) in light housing (2). Put spacer (3) inside grommet. 2. Put flat washer (4), two spring washers (5), and flat washer (6) on capscrew (7). Put capscrew through bracket (8) only. 3. Put washer (9) on capscrew (7). Push capscrew through light housing (2). 4. Put nut with washer and lockwasher (10) on capscrew (7). 5. Using 3/4-inch wrench, hold capscrew (7). Using 9/16-inch wrench, screw on and tighten nut (10). 6. Do steps 1 through 4 again for other side of light housing (2). NOTE Follow-on Maintenance Action Required: Replace floodlight sealed beam. Refer to para 7-39. END OF TASK 7-153