TM 9-2320-209-20-3-1 7-38. FLOODLIGHT HOUSING REMOVAL, REPAIR, AND REPLACEMENT (TRUCK M756A2). TOOLS: 3/4-inch box wrench 9/16-inch box wrench SUPPLIES: Solvent, dry cleaning, type II (SD-2) , Fed. Spec P-D-680 PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedure. Remove floodlight sealed beam. Refer to para 7-39. b. Removal. 1. Using 3/4-inch wrench, hold capscrew (1) and using 9/16-inch wrench, unscrew and take off nut (2), lockwasher (3), and washer (4). 2. Take out capscrew (1) with two spring washers (5), two washers (6), and washer (7). 3. Take out spacer (8) and grommet (9). 4. Do steps 1 through 3 again for other side of housing and take off floodlight housing (10). END OF TASK 7-151