TM 9-2320-209-20-3-1 b. Cleaning, Inspection, and Repair. WARNING (1) assembly. (2) contacts or (3) (4) Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well- ventilated places. Failure to do this may result in injury to personnel and damage to equipment. Using a clean cloth dampened with solvent, clean all parts of floodlight Check electrical leads for breaks, frayed insulation, rusty or dirty other damage. Check threads on bracket and nuts for damage. Throw away damaged parts and get new ones in their place. c. Replacement. 1. Put washer (1) on light bracket (2). Put light bracket into body bracket (3). 2. Put washer (4) on light bracket (2). 3. Using 15/16-inch wrenches, screw on and tighten nuts (5 and 6). 4. Plug two electrical leads (7) into connectors (8). END OF TASK 7-150