TM 9-2320-209-20-3-1 d. Assembly. 1. Put grommet (1) in light housing (2). Using screwdriver, screw in and tighten three screws (3). 2. Put socket assembly with wiring (4) into light housing (2) and pull wires through holes in grommet (1). 3. Using screwdriver, screw in and tighten two screws (5) NOTE Follow-on Maintenance Action Required: 1. Replace front marker lamps. Refer to para and two washers (6). 7-35. 2. Replace front marker light assembly. Refer to para 7-34. END OF TASK 7-148