TM 9-2320-209-20-3-1 7-30. TAILLIGHT AND STOPLIGHT ASSEMBLY (LEFT SIDE ONLY) REPAIR. TOOLS: Flat-tip screwdriver Cross-tip screwdriver (Phillips type) SUPPLIES: Mild soap Contact cleaner, MS 230 PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedures. (1) Remove left taillight (2) Remove left taillight b. Disassembly. and stoplight assembly. Refer to para 7–28. and stoplight lamps. Refer to para 7–29. NOTE On some taillight and stoplight assemblies, you will have to use a flat-tip screwdriver to take out screws (1 and 2). 1. Using phillips screwdriver, unscrew and take out two screws (1) and two washers (3). 2. Using phillips screwdriver, unscrew and take out three screws (2). 3. Take socket assembly with wiring (4) from light housing (5). END OF TASK 7-130