TM 9-2320-209-20-3-1 Replacement. 1. 2. 3. 4. 5. Put light assembly (1) in mounting bracket (2) with wires through bottom hole as shown in REAR VIEW. Put clamp (3) on three wires (4). Put clamp (3) into place and aline screw holes. Using 9/16-inch wrench, screw in and tighten capscrew (5) and lockwasher (6). Put ground wire (7) into place and aline screw holes. Using 9/16-inch wrench, screw in and tighten capscrew (8) and lockwasher (9). END OF TASK 7-127