TM 9-2320-209-20-3-1 d. Assembly. FRAME 1 1. Put socket assembly with wiring (1) into light housing (2) and pull wires through hole in light housing. 2. Using phillips screwdriver, screw in and tighten three screws (3). 3. Using flat-tip screwdriver, screw in and tighten two screws (4) and lockwashers (5). NOTE Follow-on Maintenance Action Required: 1. Replace taillight and stoplight lamps. Refer to para 7-27. 2. Replace taillight and stoplight assembly and blackout stoplight bracket. Refer to para 7-25. END OF TASK 7-123