TM 9-2320-209-20-3-1 7-26. TAILLIGHT AND STOPLIGHT ASSEMBLY (RIGHT SIDE ONLY) REPAIR (TRUCK M756A2). TOOLS: Flat-tip screwdriver Cross-tip screwdriver (Phillips type) SUPPLIES: Mild soap Electrical contact cleaner, MS 230 PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set, main light switch in OFF position. a. Preliminary Procedures. (1) Remove taillight and stoplight assembly and blackout stoplight bracket. Refer to para 7-25. (2) Remove taillight and stoplight lamps. Refer to para 7-27. b. Disassembly. FRAME 1 1. Using flat-tip screwdriver, unscrew and take out two screws (1) with lockwashers (2). 2. Using phillips screwdriver, unscrew and take out three screws (3). 3. Take out socket assembly with wiring (4) from light housing (5). END OF TASK 7-121