TM 9-2320-209-20-3-1 7-25. TAILLIGHT AND STOPLIGHT ASSEMBLY (RIGHT SIDE ONLY) REMOVAL AND REPLACEMENT (EARLY MODEL TRUCKS WITH TURN SIGNALS). NOTE The blackout stoplight is mounted on top of bracket on some trucks and on bottom of bracket on other trucks. This task is for truck M756A2. It can be used for other trucks. TOOLS: 9/16-inch wrench SUPPLIES: Tags PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set, main light switch in OFF position. a. Preliminary Procedure. Remove blackout stoplight assembly. Refer to para 7-31. b. Removal. FRAME 1 NOTE Tag three electrical lead plugs (1) so they will be put back the same way. 1. Unplug three electrical lead plugs (1) from wiring harness connectors (2). 2. Using 9/16-inch wrench, unscrew and take off two capscrews and lockwashers (3), clamp (4), and ground wire (5). 3. Take off blackout stoplight bracket (6) and taillight and stoplight assembly (7) END OF TASK 7-119