TM 9-2320-209-20-3-1 Section V. LIGHTING SYSTEM 7-17. FRONT SERVICE HEADLIGHT ASSEMBLY REMOVAL TOOLS: 7/16-inch open end wrench SUPPLIES: Tags PERSONNEL: One AND REPLACEMENT. EQUIPMENT CONDITION: Truck parked, engine off, handbrake set, light switch in OFF position. a. Preliminary Procedure. Open hood and side panel. Refer to TM 9-2320-209-20-10. b. Removal. NOTE Tag plugs (1) so they will be put back in same place. 1. Unplug three electrical plugs (1) from rear of headlight assembly (2). 2. Using 7/16-inch wrench, unscrew and take off three nuts (3) from three shock mount studs (4). Take off washers (5). 3. Take out headlight assembly (2) from front of truck. END OF TASK 7-88