TM 9-2320-209-20-3-1 FRAME 2 1. 2. 3. NOTE Make sure replacement temperature gage (1) is matched to sending unit. Put temperature gage (1) through hole in cluster panel (2) from front of panel. Put mounting bracket (3) on two studs (4) from back of cluster panel (2). Using 3/8-inch wrench, screw on and tighten two nuts and lockwashers (5) on studs (4). NOTE Procedure for replacing each of the seven instruments on instrument cluster is the same. NOTE Follow-on Maintenance Action 1. Reconnect battery ground cable. Required: Refer to para 7-58. 2. Replace instrument ‘cluster. Refer to para 7-12. END OF TASK 7-77