TM 9-2320-209-20-3-1 7-11. ENGINE STARTER REMOVAL AND REPLACEMENT (TRUCKS WITH PUSH- BUTTON STARTER SWITCH). TOOLS: 3/4-inch socket wrench 7/16-inch wrench 15/16-inch open end wrench 3/8-inch wrench 3/16-inch sockethead screw key Flat-tip screwdriver (Allen wrench or equivalent) SUPPLIES: Starter gasket Starter adapter gasket Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680 Tags PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedures. (1) Disconnect battery ground cable. Refer to para 7-58. (2) Remove intake air cleaner. Refer to para 4-3. b. Removal. FRAME 1 NOTE Truck may have either of two types of starters. 1. Check whether starter is type A or type B. IF STARTER IS TYPE A, GO TO FRAME 2. IF STARTER IS TYPE B, GO TO FRAME 3 7-54