TM 9-2320-209-20-3-1 FRAME 2 1. 2. NOTE Check tags on cables (1) to make sure they are put back on right posts (2). Put two cables (1) on two posts (2). Using 5/8-inch wrench, screw on and tighten two nuts (3) with lockwashers (4) on posts (2). NOTE Follow-on Maintenance Action Required: 1. Do adjustment procedure. Refer to para 7-8d. 2. Reconnect battery ground cable. Refer to para 7-58. 3. Operate starter. Refer to TM 9-2320-209-10. 4. Replace air cleaner filter element. Refer to TM 9-2320-209-10. END OF TASK 7-43