TM 9-2320-209-20-3-1 7-8. STARTER SWITCH REMOVAL, REPLACEMENT AND ADJUSTMENT (TRUCKS WITH PEDAL STARTER). TOOLS: 5/8-inch box wrench 1/2-inch wrench Flat-tip screwdriver C-clamp SUPPLIES: Tags PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedures. (1) Remove air cleaner filter element. Refer to TM 9-2320-209-10. (2) Disconnect battery ground cable. Refer to para 7-58. NOTE When taking electrical cables off posts, always tag cables so they will be put back on right post. b. Removal. FRAME 1 1. Using 5/8-inch wrench, unscrew and take off two nuts and washers (1). 2. Lift cables (2 and 3) off starter switch (5). 3. Using screwdriver, unscrew and take out four screws with lockwashers (4). 4. Lift off starter switch (5). END OF TASK TA 047153 7-41