TM 9-2320-209-20-3-1 FRAME 2 NOTE Check tags on cables to make sure cables are put back on right posts. 1. Put on cable (1) and lockwasher (2) and screw on nut (3). Using 3/8-inch wrench, tighten nut. NOTE Trucks equipped with pedal starter have only one cable (4). 2. Put on two cables (4) and lockwasher (5) and screw on nut (6). Using 5/8- inch wrench, tighten nut. 3. Put on cable (7) and lockwasher (5) and screw on nut (6). Using 5/8-inch wrench, tighten nut. GO TO FRAME 3 7-39