TM 9-2320-209-20-3-1 b. Removal. NOTE When taking electrical cables off posts, always tag cables so they will be put back on correct post . On trucks with LD series engines, magnetic switch mounting bracket is mounted on engine. Trucks with LDS series engine have bracket mounted on exhaust support bracket as shown. FRAME 1 1. Using 7/16-inch wrench, unscrew and take off two nuts and lockwashers (1). 2. Pull out magnetic starter switch (2). 3. Using 3/8-inch wrench, unscrew and take off nut (3) and take off cable (4). 4. Using 5/8-inch wrench, unscrew two nuts (5) and take off cables (6 and 7). Take magnetic starter switch (2) from truck. NOTE Trucks with pedal starter have only one cable (7). GO TO FRAME 2 7-36