TM 9-2320-209-20-3-1 c. Repair. Repair starter pedal and linkage by straightening, welding, or replacing any bent or damaged parts. Refer to FM 43-2 or TM 9-237. d. Replacement. FRAME 1 Soldier A 1. Put starter pedal (1) on floor of cab and aline four mounting holes as shown. 2. Put four bolts (2) through mounting holes. Hold bolts down with fingers and tell soldier B to put on mounting plate (3). Soldier B 3. Put mounting plate (3) on four bolts (2) and screw on four locknuts (4) finger tight. Tell soldier A which bolt to hold with wrench when ready to tighten locknuts. Soldier A 4. Using 7/16-inch wrench, hold each of four bolts (2). Soldier B 5. Using 7/16-inch wrench, tighten each of four locknuts (4). GO TO FRAME 2 7-31