TM 9-2320-209-20-3-1 Section III. STARTING SYSTEM 7-6. STARTER PEDAL AND LINKAGE ASSEMBLY REMOVAL, REPAIR, AND REPLACEMENT. TOOLS : 7/16-inch 7/16-inch SUPPLIES: None PERSONNEL: TWO socket wrench open end wrench EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedures. (1) Open hood and side panels. Refer to TM 9-2320-209-10. (2) Disconnect battery ground cable. Refer to para 7-58. b. Removal. FRAME 1 Soldier A 1. Using 7/16-inch wrench, hold four bolts (1) while soldier B unscrews locknuts (2). Soldier B 2. Using 7/16-inch wrench, unscrew and take off four locknuts (2) and take off mounting plate (3). Soldier A 3. Take out four bolts (1) and lift off pedal assembly (4). 4. Using 7/16-inch wrench, hold two bolts (5) while soldier B unscrews locknuts (6). Soldier B 5. Using 7/16-inch wrench, unscrew and take off two locknuts (6). Soldier A 6. Take out two bolts (5). GO TO FRAME 2 7-29