TM 9-2320-209-20-3-1 c. Replacement. FRAME 1 1. Put generator regulator (1) on shock mount assembly (2) as shown. 2. Put on four lockwashers (3). Using 1/2-inch wrench, screw on and tighten four nuts (4). 3. Aline slot in generator cable connector (5) with key in receptacle (6). Plug in connector and screw on tight. 4. Aline slot in chassis wiring connector (7) with key in receptacle (8). Plug in connector and screw on tight. NOTE Follow-on Maintenance Action Required: 1. Do polarization procedure. Refer to para 7-3. 2. Reconnect battery ground cable. Refer to para 7-58. 3. Start engine and check that battery-generator indicator is in green area. Stop engine. Refer to TM 9-2320-209-10. 4. Close hood and left side panel. Refer to TM 9-2320-209-10. END OF TASK 7-28