TM 9-2320-209-20-3-1 FRAME 6 CAUTION Be careful when putting positive cable terminal lug (1) on terminal (2). This cable goes to the battery. The lug is larger and more rounded on one side. This side must go up. Putting lug on the wrong way could short 1. 2. 3. out the alternator and damage it. Put positive cable terminal lug (1) on terminal (2) as shown. (3) on terminal and screw on nut (4). Using torque wrench, 45 to 55 pound-inches. Put ground cable terminal lug (5) over hole in terminal block Put lockwasher (7) on bolt (8) and put bolt through terminal Put lockwasher tighten nut to (6) as shown. lug. Screw bolt (8) into terminal block (6), and using torque wrench, tighten bolt to 82 to 102 pound-inches. GO TO FRAME 7 7-25