TM 9-2320-209-20-3-1 FRAME 5 1. 2. 3. 4. Push alternator (1) toward engine and slip two V-belts (2) over pulley (3). Swing adjustment bracket (4) down to alternator (1). Aline hole in flange (5) with slot in adjustment bracket. Put lockwasher (6) and key washer (7) on bolt (8) as shown. Put bolt (8) with washers (6 and 7) through slot in adjustment bracket (4) and screw into flange (5) finger tight. NOTE Bolt (8) will be tightened with wrench during fan belt tension adjustment procedure. This procedure is part of follow-on maintenance. GO TO FRAME 6 7-24