TM 9-2320-209-20-3-1 FRAME 4 1. 2. 3. 4. 5. Using pliers, take two cotter pins (1) out of two bolts (2) and throw cotter pins away. Using 5/8-inch wrenches, unscrew and take off two nuts and washers (3) from bolts (2). NOTE Be careful when pulling out alternator rear bolt. Shim (4) may fall out. Hold alternator (5) up and pull bolts (2) out of mounting bracket (6). Leave two flat washers (7) on bolts. Take shims (4) out from between alternator (5) and mounting bracket (6). Set shims aside. WARNING Be careful when lifting alternator. It is heavy and could injure personnel or damage equipment if dropped. Lift out alternator (5). GO TO FRAME 5 7-17