TM 9-2320-209-20-3-1 1. Fill a 5-gallon container with water to within 1 inch of the top. 2. Add 1 bag of alkaline conditioner to water and mix thoroughly. 3. Pour contents of 5-gallon container into filler tube (1). 4. Fill cooling system with water. 5. Put on filler cap (2) and press down and turn it all the way to the right. NOTE Put cardboard in front of radiator to raise engine temperature if needed, but do not let solution boil. 6. Start engine and let it run for 60 minutes after engine temperature reaches 160°F to 180°F. Refer to TM 9-2320-209-10. GO TO FRAME 5 TA 083304 6-70