TM 9-2320-209-20-3-1 1. Put hose (1) on elbow (2). 2. Slide two clamps (3) on hose (1) and elbow (2). 3. Put hose (1) and elbow (2) in place as shown. 4. Using 1/2-inch socket wrench with 10-inch extension, screw on and tighten four nuts (4). 5. Using screwdriver, tighten two clamps (3). NOTE Follow-on Maintenance Action Required: Close hood and right side panel. Refer to TM 9-2320-209-10. END OF TASK TA 082202 6-30