TM 9-2320-209-20-3-1 c. Replacement. 1. Put two shims (1) on two radiator mounting studs (2). 2. Tape shims (1) to bottom of radiator (3) using short lengths of masking tape. This will prevent shims from dropping off during installation. CAUTION Be very careful when putting radiator into engine compart- ment. Core (4) and shroud (5) can be easily damaged. Soldiers 3. Lower radiator (3) into engine compartment. Radiator mounting studs A and B (2) must go through holes (6) in bracket (7) as shown. GO TO FRAME 2 6-8