TM 9-2320-209-20-3-1 1. Put two U-bolts (1) through two brackets (2). Set one bracket in top of shield assembly (3) and other bracket in bottom. 2. Put shield assembly (3) against exhaust bracket (4) and push two U-bolts (1) through holes in exhaust bracket. 3. Screw four locknuts (5) on U-bolts (1). Do not tighten locknuts at this time. 4. Slide lower stack pipe (6) up through fender (7), shield (3), and U-bolts (1). GO TO FRAME 10 TA 047245