TM 9-2320-209-20-3-1 FRAME 2 I 1. Put clamp (1) on control cable (2) and injector pump flange as shown. Put in screw (3), two lockwashers (4), and nut (5) as shown. Do not tighten nut at this time. 2. Slide control cable (2) in clamp (1) to put control wire (6) through hole in swivel (7). Do not tighten screw (8) at this time. 3. Snap clip (9) around control cable (2) and steering column (10). END OF TASK TA 047399 4-178