TM 9-2320-209-20-3-1 c. Repair. Repair accelerator controls and linkages by replacing damaged or unserviceable parts. d. Replacement. FRAME 1 Soldier A Soldier B Soldier A Soldier B Soldier A 1. Put two bolts (1) through floor and hold bolts down with fingers. 2. Working under truck, put control bracket (2) on two bolts (1) and screw on two locknuts (3). 3. Using wrench, hold each of two bolts (1) in turn. 4. Using socket wrench, tighten locknuts (3). 5. Put connecting link (4) through slot in floor as shown. 6. Put control pedal (5) in pedal bracket (6) as shown. Put straight pin (7) through pedal bracket and control pedal. 7. Put end of connecting link (4) through hole at top of control pedal. Put cotter pin (8) through connecting link. Using pliers, spread cotter pin. GO TO FRAME 2 TA 047147 4-169