TM 9-2320-209-20-3-1 FRAME 3 Soldier B 1. Slide connector (1) along control wire (2) until it is flush against clip (3). 2. Using screwdriver, tighten screw (4). Soldier A 3. Push and release accelerator pedal (5) three or four times. Soldier B 4. Check that clip (3) slides back and forth freely on control wire (2). Soldier A 5. Pull out and push in THROTTLE control (6) three or four times. Soldier B 6. Check that accelerator rod (7) moves back and forth freely. NOTE Follow-on Maintenance Action Required: Close hood and right side panel. Refer to TM 9-2320-209-10. END OF TASK TA 047392 4-165