TM 9-2320-209-20-3-1 e. Adjustment. FRAME 1 Soldier A 1. Push THROTTLE control (1) all the way in. Using foot, push and hold accelerator pedal (2) hard against stop. Soldier B 2. Check that accelerator rod (3) moves toward firewall as shown by arrow , and that it stays there. Using 6–inch scale, measure distance (4) between end of control cable housing (5) and clip (6). 3. Slide throttle control cable (7) through floor board until distance (4) is about 1/2 inch. Soldier A 4. Take foot off accelerator pedal (2) . GO TO FRAME 2 4-163