TM 9-2320-209-20-3-1 c. Replacement. 1. 2. 3. 4. 5. Put filter (1) in place and aline screw hole. Using 9/16 inch wrench, screw in and tighten capscrew (2) and lockwasher (3) Using 11/16-inch wrench, hold filter ( 1). Using 7/16-inch wrench, screw on and tighten tube fitting (4). Using 11/16-inch wrench, hold filter (1). Using 9/16-inch wrench, screw in and tighten elbow (5). Using 9/16-inch wrench , screw in and tighten adapter (6). Using 9/16-inch wrench, hold adapter (6) . Using 7/16-inch wrench, screw in and tighten tube fitting nut ( 7). NOTE Follow-on Maintenance Action Required: Close hood and left side panel. Refer to TM 9-2320-209-10. END OF TASK TA 083336 4-130