TM 9-2320-209-20-3-1 c. Replacement. FRAME 1 1. Screw on and hand tighten nozzle and valve assembly (1) until there is l/2-inch clearance between nozzle and valve assembly and housing (2). 2. Using l-inch wrench tighten jamnut (3). 3. Using 7/16-inch 6-point socket, screw in and tighten inlet adapter (4). 4. Using 3/8-inch wrench, screw on and tighten tube adapter (5) with tube (6). 5. Using 7/16-inch wrench, screw on and tighten tube adapter (7) with tube (8). 6. Put fuel from container in approved disposal area. NOTE Follow-on Maintenance Action Required: Close hood and right side panel. Refer to TM 9-2320-209-10. END OF TASK TA 101736 4-122