TM 9-2320-209-20-3-1 1. Put fuel filter (1) and fuel pump (2) in place. Aline holes of two brackets (3). 2. Using 1/2-inch socket wrench, screw on and tighten two screws with washers ( 4). 3. Using 7/16-inch wrench, screw on and tighten tube adapter (5) to filter (1). 4. Using 3/8-inch wrench, screw on and tighten tube adapter (6) to pump (2). 5. Screw on and tighten electrical connector (7) to fuel pump (2). NOTE Follow-on Maintenance Action Required: 1. Reconnect battery ground cable. Refer to para 7-58. 2. Close hood. Refer to TM 9-2320-209-10. END OF TASK TA 083341 4-101