TM 9-2320-209-20-3-1 1. Screw spark plug (1) with gasket (2) into housing assembly (3). Using 7/8-inch wrench, tighten spark plug. 2. Using 3/4-inch wrench, screw on and tighten ignition lead with fitting (4). 3. Using l-inch wrench, screw in and tighten nozzle and valve assembly (5). 4. Using 5/8-inch wrench, screw in and tighten elbow (6) to position noted. 5. Put small fuel line (7) into elbow (6) and using 5/16-inch wrench, screw in and tighten coupling nut (8). 6. Put large fuel line (9) into nozzle and valve assembly ( 5). Using 9/16-inch and 7/16-inch wrenches, screw in and tighten coupling nut ( 10). GO TO FRAME 3 TA 047065 4-92