TM 9-2320- 209-20-3-1 c. Replacement. FRAME 1 1. Screw in and hand tighten nozzle and valve assembly (1). 2. Using 13/16-inch and l-inch wrenches, hold nozzle and valve assembly (1) and tighten locking nut (2), 3. Using 13/16-inch and 5/8-inch wrenches, hold nozzle and valve assembly (1) and screw in and tighten bushing (3) . 4. Using 7/16-inch wrench, screw in and tighten tube nut (4) . 5. Using 5/16-inch wrench, screw in and tighten tube nut (5) . 6. Take away container and put liquid in approved disposal area. NOTE Follow-on Maintenance Action Required: Close hood and right side panel. Refer to TM 9-2320-209-10. END OF TASK TA 086457 4-72