TM 9-2320-209-20-3-1 FRAME 2 1. 2. 3. 4. 5. 6. Put filter head gasket (1) into filter head (2). Fit filter housing (3) to filter head (2). Screw in sleeve nut (4) with washer (5) and gasket (6). Using torque wrench with 5/8-inch socket wrench, tighten sleeve nut (4) to 180 pound-inches. NOTE Some trucks have only one bleeder valve ( 7). Using 7/16-inch wrench, screw in and tighten two bleeder valves (7) . Using 9/16-inch wrench, screw on and tighten three elbows ( 8) to positions noted. Using 5/8-inch wrench, screw on and tighten elbow ( 9). NOTE Follow-on Maintenance Action Required: Put fuel filters back in truck. Refer to para 4-10. END OF TASK TA 047518 4-70