TM 9-2320-209-20-3-1 FRAME 2 I 1. Put new filter element (1) into filter housing (2). 2. Put filter head gasket (3) into filter head (4). 3. Fit filter housing (2) to filter head (4). Screw in sleeve nut (5) with gasket (6). 4. Using torque wrench with l-inch socket wrench, tighten sleeve nut (5) to 180 pound-inches. 5. Using 7/8-inch wrench, screw in and tighten two fittings (7 and 8) to positions noted. END OF TASK TA 047011 4-68