TM 9-2320-209-20-3-1 WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire ex– tinguisher nearby when solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. d. Cleaning, Inspection, and Repair. Clean all parts with solvent. Check parts for burrs, nicks, and scratches on mating surfaces. Put in new parts for damaged or bent parts. e. Assembly of Primary Fuel Filter. 1. Put washer (1), spring (2), washer (3), gasket (4), and cup (5) on post (6) as shown. 2. Using 7/16-inch wrench, screw in and tighten drain cock (7) . GO TO FRAME 2 TA 047010 4-67