TM 9-2320-209-20-3-1 1. Swing two retaining bands (1) up against fuel tank (2). 2. Join retaining bands (1) to top straps (3) with bolts (4) as shown. Screw locknuts (5) on bolts and tighten using 5/8-inch wrenches. 3. Using 1/2-inch wrenches, tighten two locknuts (6) on bolts (7). NOTE Follow-on Maintenance Action Required: 1. Join fuel lines and electrical connector to in-tank fuel pump. Refer to para 4-8. 2. Reconnect battery ground cable. Refer to para 7-58. 3. Fill fuel tank. Refer to TM 9-2320-209-10. 4. Start engine and check fuel line fittings for leaks. Stop engine. Refer to TM 9-2320-209-10. 5. Check operation of fuel gage. Refer to TM 9-2320-209-10. END OF TASK TA 047173 4-32