TM-9-2320-209-20-2-1 Troubleshooting Part 1 for M44A1 and M44A2 Series Trucks
Page 19 of 645
TM 9-2320-209-20-2-1 CHAPTER 4 TEST EQUIPMENT PROCEDURES INDEX 4-1. GENERAL. This chapter has a test equipment procedures index which tells you where to find the tests you need to do your troubleshooting. 4-2. INDEX. The test equipment procedures index is divided into three columns that list test equipment, tests, and figure numbers. The following breakdown tells you what is in each column. a. Test Equipment Column. This column tells you what kind of equipment you need to do your troubleshooting tests. For all electrical tests, a multimeter is used. The multimeter can be any one of three models fielded for your use. These models are given in the test equipment column. For mechanical tests, test equipment is also given, along with the part number of the equipment. b. Tests Column. This column tells you what tests are given in this manual. Next to each piece of test equipment are listed the tests that you can do with that equip- ment. This column also gives troubleshooting tests which can be done without using test equipment. c. Figur e Column. This column tells you where you can find the tests in this manual. The first test given is the DC Voltage test. The figures given for this test are 28-2, 28-8, and 28-14. Three figures are given for each multimeter test because there are three multimeter models. 4-1