TM 9-2320-209-10-4 FRAME 2 1. On trucks without dropsides: (a) Put bow (1) in place in two corner and stake assemblies (2) and aline holes. (b) Using screwdriver, screw in and tighten two screws (3) on each corner and stake assembly (2). 2. On trucks with dropsides: (a) Put bow (1) in place in corner and stake assemblies (2). (b) Push down on hinged clip (3), to lock bow (1) in place. 3. Put bow assembly (4) in place in sockets (5). 4. Do steps 1 through 3 again, as required, for other bow assemblies. END OF TASK 2-55