TM 9-2320-209-10-4 Section VII. SPECIAL PURPOSE KITS EQUIPMENT ITEMS MAINTENANCE 2-14. BOW AND TARP KITS INSTALLATION AND REMOVAL. TOOLS: Cross-tip screwdriver (Phillips type) SUPPLIES: Chalk PERSONNEL: Two EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. CAUTION Do not fold or stow paulin or end curtains if they are wet. When folding, make sure surface they are spread on is dry. Canvas can be damaged if it is stowed while wet. a. Installation of Bow Assemblies. FRAME 1 1. 2. On cargo trucks with dropsides, take corner and stake assemblies (1) out of storage sockets in front of rack (2). On trucks without dropsides, take corner and stowage assemblies (1) from storage area on truck bed. Unbuckle two straps (3), one on each side of truck, and take out bows (4). GO TO FRAME 2 2-54