TM 9-2320-209-10-4 c. Replacement. FRAME 1 1. 2. 3. 4. 5. Check that truck is jacked up at wheel to be replaced. CAUTION Do not slide wheel assembly on threaded studs. Sliding wheel assembly may damage threads. NOTE Treads of rear dual wheels tires should be matched as closely as possible. Lift wheel assembly (1) up and onto wheel studs (2). Make sure that one of the ventilation holes lines up with brake inspection plate (3) . NOTE Nuts have left-hand threads on left wheel assembly and right-hand threads on right wheel assembly. Stud and nuts are stamped (L) left and (R) right. Screw on and hand tighten six nuts (4) on wheel studs (2). Using square end of wheel stud nut wrench (5), tighten nuts (4) in order shown. As soon as you can, take truck to organizational maintenance and have wheel stud nuts torqued to 325 to 350 pound-feet. Put on outer rear wheel and jack down truck. Refer to para 2-7. 2-30