TM 9-2320-209-10-4 2-7. FRONT AND OUTER REAR WHEELS REMOVAL AND REPLACEMENT. NOTE The following tasks are the same for both front wheels and all four outer rear wheels. TOOLS : Wheel stud nut wrench and handle Hydraulic screw jack with handle SUPPLIES: None PERSONNEL: One EQUIPMENT CONDITION: Truck parked on level ground, engine off, handbrake set, wheels chocked. a. Preliminary Procedure. Remove spare wheel if needed to replace damaged wheel. Refer to para 2-6. b. Removal. FRAME 1 I 1. Using wheel stud nut wrench (1), loosen six wheel stud nuts (2). Do not take off wheel stud nuts. NOTE Wheel stud nuts (2) on left side have left hand threads and must be turned to the right to loosen them. Wheel stud nuts on right side have right hand threads and must be turned to the left to loosen them. Studs and nuts are stamped (L) left and (R) right. GO TO FRAME 2 2-22