TM 9-2320-209-10-4 2-6. SPARE WHEEL REMOVAL AND REPLACEMENT. TOOLS : Wheel stud nut wrench 1 l/2-inch wrench 13/16-inch wrench SUPPLIES : None PERSONNEL: Two EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Removal. (1) All trucks except M342A2, M275A1, and M275A2. FRAME 1 1. Using wheel stud nut wrench, loosen two nuts (1). 2. Turn spare wheel (2) about 1 inch to left to aline nuts (1) with hole in bracket (3). 3. Using wheel stud nut wrench, turn shaft (4) to right slightly. 4. Lift up pawl (5). 5. Using wheel stud nut wrench, turn shaft (4) to left until spare wheel (2) is on ground. GO TO FRAME 2 2-16