TM 9-2320-209-10-3 CHAPTER 6 FAULT, SYMPTOM INDEXES 6-1. GENERAL. This chapter gives troubleshooting fault symptom indexes for every system of the truck for which you have detailed troubleshooting procedures. These indexes are in table form (tables 6-1 through 6- 15) which gives you a quick way to check what material you have to use to do your troubleshooting. 6-2. INDEXES. Each index is divided into columns which give you information you need to help you do troubleshooting procedures. The following breakdown tells you what is in each column. a. Subsystem Column. If the main system is divided into subsystems, the subsystems will be listed in this column. b. Symptom Column. This column lists the symptoms, or problems for which detailed troubleshooting procedures are given. c. Summary Column. No summary troubleshooting procedures are needed at the operator’s level of troubleshooting, so, the summary column is not used. d. Detailed Column. This column tells you where to find the detailed trouble- shooting procedure for each symptom. e. Persons Column. This column tells you how many people are needed to the troubleshooting procedure. do f. Special Tools Column. Any tools needed to do the troubleshooting pro- cedure which are not included in your common tool kit are listed in this column. g. Standard Tools Column. A dot in this column means that tools found in your common tool kit are needed to do the troubleshooting procedure. h. Materials Column. This column tells you what materials are needed to do the troubleshooting procedure. These materials and how decided by your maintenance officer. i. Time Column. This column tells you how much the detailed troubleshooting procedure. The time will be tenance officer. they will be issued will be time you will need to do decided by your main- 6-1