TM 9-2320-209-10-1 c. Driver’s Compartment Controls and Indicators - Cont. 1. TRANSFER CASE shift lever. 7. Transfer POWER TAKE OFF LEVER. Moved to (DOWN) LOW for heavy Supplies power to operate auxiliary load conditions and to (UP) HIGH for equipment when in the up position. light load conditions. 8. Handbrake control lever. Is pulled 2. Backrest control lever. Used to up to set handbrake. The knob at change position of the lower section the top of the handle is turned to of the backrest. set brake cable tension. 3. Seat cushion control lever. Used to 9. Shifting lever hinge lock. Locks move rear portion of seat cushion up transmission power take-off lever or down. in neutral position. 4. Seat horizontal control lever. Used 10. POWER TAKE OFF SHIFTS LEVER. to move seat forward or backward. Is moved forward to HIGH or LOW 5. Slotted bracket. Used to move front position to give power to front winch of seat cushion up or down. for reeling in a load. Moved to REV (reverse) position to release or lower 6. Locking bar. Locks power take-off a load. lever in off position when bar is turned to up and down position. ~ ‘f L. TA 044947 4-8