TM 9-2320-209-10-1 Section III. TABULATED DATA 2-5. GENERAL. This section contains reference data, in table form, for use by the operator when using the equipment. Data is given for the following areas: a. Physical data b. Functional characteristics c. Capabilities and limitations d. Environmental characteristics 2-6. WEIGHT. Table 2-1 gives the weight of all trucks covered in this manual under various conditions. Column “Net w/wn” means trucks with winch. 2-7. DIMENSIONS. Tables 2-2 and 2-3 give overall and operating dimensions for all trucks covered in this manual. 2-8. CAPACITIES. Table 2-4 gives the liquid capacities for various systems. 2-9. TIRE INFLATION DATA. Table 2-5 gives tire inflation data for all trucks covered in this manual. 2-10. ENVIRONMENTAL CHARACTERISTICS. Table 2-6 lists the fuels that can be used in all trucks under various temperature conditions. 2-11. FUNCTIONAL CHARACTERISTICS. Tables 2-7 and 2-8 give data relating to the functional characteristics of all trucks covered in this manual. 2-12. COMPONENTS OF END ITEM LIST. Integral components and basic issue items required for 2 l/2-ton trucks are listed in appendix B. 2-13. ADDITIONAL AUTHORIZATION LIST. Additional items authorized for the support of 2 l/2-ton trucks are listed in appendix C. 2-14. EXPENDABLE SUPPLIES AND MATERIALS LIST. Expendable supplies and mater- ials needed to operate and maintain the 2 1/2-ton trucks are listed in appendix D. 2-21