TM 9-2320-209-10-1 1. Plug service cable connectors (1) into slave receptacle (2) on each vehicle. 2. Start engine of slaving vehicle. (Refer to para 4-6b.) 3. Set idle speed at 1,000-1100 rpm. 4. Start engine of disabled vehicle. (Refer to para 4-6b.) 5. As soon as engine is running smoothly, remove service cable connectors (1) from receptacles (2). 6. Swing protective caps (3) back into position and screw cap onto receptacle. 7. Stop engine on slaving vehicle. (Refer to para 4-6e.) GO TO FRAME 3 4-396