TM 9-2320-209-10-1 k. Setting Poles. TOOLS: Pike, pole, wood, 12 ft long Spoon, hand, telegraph, 8 ft long, size 2 Tamp, backfill, 8 ft long, type III Bar, digging and tamping, 8 ft long Tagline PERSONNEL: Two FRAME 1 WARNING Check derrick tube (1) carefully for damage before using. A tube bend or flat spot can cause collapse under load. If tube is damaged tell organizational maintenance. When using derrick tube to lift loads. do not exceed pulling capacities given on caution plate (2), mounted on derrick tube. 1. Place the truck so that the derrick sheave (3) will be in position above hole (4) when derrick is placed for lifting. 2. Place outriggers (5) in position on ground. (Refer to para 4-15b.) GO TO FRAME 2 CHANGE 1 4-365